The effectiveness of EDTA 17% as a cleaning solution for the fiber post space after filling with cements

Aim: To evaluate the resistance of the union between a glass fiber post and radicular dentine after cleaning the root with 17% EDTA and filling with different endodontic cements. Methods: Forty uniradicular bovine incisors were removed to obtain root lengths of 18 mm. Endodontic treatment was performed on all roots using different filling cements (zinc oxide and eugenol-based, OZE; cement based on epoxy resin, AH) and cleaning solutions (saline, SA or EDTA), which made it possible to obtain four groups: OZESA, OZEEDTA, AHSA and AHEDTA. Subsequently, 12 mm of filling material was removed from the roots, and they were prepared to receive fiber posts luted with resin cement. To execute the mechanical cycles (2x106 cycles, 90 N, 4 Hz), coronal reconstruction was performed with a silicon matrix. The roots were then sliced (2-mm thick) to perform the push-out test. The results were analyzed using analysis of variance (one factor and two factors) and Tukey's test (α=0,05). Results: Bond strength (Mpa) was significantly higher for OZEEDTA (9,18) and AHEDTA (8,70) than for OZESA (6,06) AHSA (8,7). OZEEDTA also presented the highest values in the cervical region (15,18) but was significantly lower in the apical region (2,99). However, AHEDTA had a homogeneous bond strength in all thirds. Conclusion: Regardless of the endodontic cement used, EDTA was used as an irrigating solution, culminating in a higher bond strength between the glass fiber post and dentin

Avaliação radiográfica da resposta pulpar e periapical de dentes de cães ao Emdogain® após pulpotomia / Radiographic evaluation of pulpal and periapical response of dogs teeth to Emdogain® used as pulpotomy agent

Introdução: O derivado da matriz do esmalte (Emdogain®) é um extrato de proteína usado para cicatrização periodontal. Objetivo: O objetivo desse estudo foi avaliar radiograficamente a resposta pulpar e periapical de dentes de cães após pulpotomia e uso do gel derivado da matriz do esmalte (Emdogain®). Métodos: A pulpotomia foi realizada em 30 dentes (60 raízes) de 3 cães, e o tecido pulpar remanescente foi recoberto com os seguintes materiais: Grupos 1 e 4: gel derivado da matriz do esmalte (Emdogain®); Grupos 2 e 5: hidróxido de cálcio; Grupos 3 e 6: óxido de zinco e cimento de eugenol. Após 10 dias (Grupos 1-3) e 75 dias (Grupos 4-6) foram obtidas radiografias periapicais e a avaliação radiográfica foi realizada considerando-se: a integridade da lâmina dura, presença de áreas de rarefação óssea periapical, reabsorção radicular (interna e externa) e formação de ponte de dentina. Resultados: No período de 10 dias, todos os espécimes dos Grupos 1-3 apresentaram ausência de rarefação óssea periapical, reabsorção radicular (interna e externa) e formação de ponte dentinária. No período de 75 dias, os Grupos 4-6 não apresentaram formação de ponte dentinária em nenhum espécime. Áreas de rarefação óssea periapical foram observadas em 100% das raízes no Grupo 4, 62,5% das raízes no Grupo 6 e em 25% das raízes nos Grupos 5. Conclusão: O uso do gel derivado da matriz do esmalte (Emdogain®) como material para capeamento após a pulpotomia levou à formação de lesões periapicais e não induziu a deposição de tecido mineralizado (AU).

Introduction: The enamel matrix derivative (Emdogain®) is a protein extract used for periodontal healing. The objective of this study was to evaluate radiographically the pulpal and periapical response of dogs teeth after pulpotomy and use of enamel matrix derivative gel (Emdogain®). Methods: Pulpotomy was performed in 30 teeth (60 roots) from 3 dogs and the remaining pulp tissue was capped with the following materials: Groups 1 and 4: enamel matrix derivative gel (Emdogain®); Groups 2 and 5: calcium hydroxide; Groups 3 and 6: zinc oxide and eugenol cement. After 10 days (Groups 1-3) and 75 days (Groups 4-6) periapical radiographs were obtained and the radiographic evaluation was performed considering the integrity of the lamina dura, presence of areas of periapical bone rarefaction, root resorption (internal and external) and dentin bridge formation. Results: In the 10- day period, all specimens in Groups 1-3 presented absence of periapical bone rarefaction, absence of root resorption (internal and external) and absence of dentin bridge formation. In the 75-day period, Groups 4-6 did not present dentin bridge formation in any specimen. Periapical bone rarefaction areas were observed in 100% of the roots in Group 4, 62,5% of the roots in Group 6 and in 25% of the roots in Groups 5. Conclusion: The use of enamel matrix derivative gel (Emdogain®) as a capping material after pulpotomy lead to formation of periapical lesions and did not induce deposition of mineralized tissue(AU).

Physicochemical properties and effect of bioceramic root canal filling for primary teeth on osteoblast biology

Abstract Bio-C Pulpecto (Bio-CP) was recently developed as the first bioceramic root filling material for primary teeth. Objective To evaluate the physicochemical properties of radiopacity, setting time, pH, cytocompatibility and potential of Bio-CP to induce mineralisation, compared with (1) Calen thickened with zinc oxide (Calen-ZO), and (2) zinc oxide and eugenol (ZOE). Methodology Physicochemical properties were evaluated according to ISO 6876. Saos-2 (human osteoblast-like cell line) exposed to extracts of the materials were subjected to assays of methyl thiazolyl tetrazolium, neutral red, alkaline phosphatase (ALP) activity and mineralised nodule production. The results were analysed using one-way or two-way ANOVA and Tukey's or Bonferroni's post-tests (α=0.05). Results All the materials showed radiopacity higher than 3 mm Al. Bio-CP had lower pH than Calen-ZO, but higher pH than ZOE. Calen-ZO and Bio-CP did not set. The setting time for ZOE was 110 min. The cytocompatibility order was Calen-ZO > Bio-CP > ZOE (1:2, 1:4 dilutions) and Calen-ZO > Bio-CP = ZOE (1:12, 1:24 dilutions) and Calen-ZO = Bio-CP > ZOE (1:32 dilution). Bio-CP induced greater ALP activity at 7 days, and greater mineralised nodule production, compared to Calen-ZO (p<0.05). Conclusions Bio-CP showed adequate physicochemical properties, cytocompatibility and potential to induce mineralisation.

Infiltration by Streptococcus mutans in provisional crowns fixed by two types of cementing agents ­ pilot double-blind randomized clinical trial / Infiltração por Streptococcus mutans em coroas dentárias provisórias fixadas por dois tipos de agentes cimentantes ­ estudo clínico randomizado duplo-cego piloto

Objective: When provisional acrylic crowns are used for a long time, they become more susceptible to marginal leakage by cariogenic bacteria. The objectives of this pilot clinical study were to compare cement based on zinc oxide-eugenol and calcium hydroxide by contamination with Streptococcus mutans, and calculate the sample size for the continuation of this study. Methods: Individuals receiving provisional crowns and following inclusion/exclusion criteria, were randomly distributed into 2 groups: zinc oxide-eugenol (n=8); calcium hydroxide (n=9). The temporary crowns were made by a blind researcher and cemented by another. Patients were also blinded by the cement used inside their crowns. After 2 months, a cement sample from the crowns' peripheral inner face was collected, placed in a tube containing 1 mL of sterile saline, serially diluted, plated on Mitis Salivarius Bacitracin agar, and incubated for 48 hours. Colony-forming units (CFU/mL) were counted. A statistical power analysis was performed to calculate sample size (1-ß=80%) and the Mann Whitney test to compare both cements (α=0.05). Results: Both cements were contaminated with S. mutans, with an average of 166.6 x 102 CFU/mL for calcium hydroxide and 435.3 x 102 CFU/mL for zinc oxide-eugenol, with no significant difference (p=0.311). The sample size calculated for this study was 36 per group. Conclusion: This pilot study suggests that there is important contamination inside provisional crowns used for two months, independent of the cement. The continuation of this study is needed, with a bigger sample size, to enable a comparison between the cements.

Objetivo: Quando coroas dentais provisórias são utilizadas por um longo período, elas se tornam susceptíveis à infiltração marginal por bactérias cariogênicas. O objetivo deste estudo clínico piloto foi comparar os cimentos a base de óxido de zinco e eugenol e hidróxido de cálcio pela contaminação com Streptococcus mutans e calcular o tamanho amostral para continuação deste estudo. Métodos: Indivíduos recebendo coroas provisórias e seguindo critérios de inclusão/exclusão, foram distribuídos aleatoriamente em dois grupos: óxido de zinco e eugenol (n=8); hidróxido de cálcio (n=9). As coroas provisórias foram feitas por um pesquisador cego e cimentadas por outro. Os pacientes também foram cegos quanto ao cimento utilizado dentro de suas coroas. Depois de 2 meses, amostras de cimentos foram coletadas da face interna periférica das coroas, colocadas em um tubo contendo 1 mL de solução salina estéril, diluídas de forma seriada, plaqueadas em ágar Mitis Salivarius Bacitracina e incubadas por 48 horas. Unidades formadoras de colônias (UFC/mL) foram contadas. Um teste de poder estatístico foi realizado para calcular o tamanho amostral (1-ß=80%) e o teste de Mann Whitney para comparar os dois cimentos (α=0.05). Resultados: Os dois cimentos foram contaminados com S. mutans, com uma média de 166.6 x 102 UFC/mL para o hidróxido de cálcio e 435.3 x 102 UFC/mL para o óxido de zinco e eugenol, com nenhuma diferença significativa (p=0.311). O cálculo amostral para este estudo foi 36 indivíduos por grupo. Conclusão: Este estudo piloto sugere que existe importante contaminação dentro de coroas provisórias utilizadas por 2 meses, independente do cimento. A continuação deste estudo é necessária, com maior tamanho amostral, para possibilitar a comparação entre os cimentos.

A influência do eugenol na microdureza de duas resinas compostas comerciais / The influence of eugenol on the microhardness of two commercial composite resins

Objetivo: avaliar, in vitro, a dureza superficial e profunda de dois tipos diferentes de resina composta, quandoem contato com o cimento de óxido de zinco e eugenol (IRM®). Métodos: foram selecionadas as resinasCharisma® e Vittra® e confeccionados 80 corpos de prova, sendo 40 para cada marca de compósito, queforam divididos em oito grupos (n=10) conforme o contato (imediato, 7 dias, 14 dias) ou não (grupo controle)com o eugenol. Colocou-se num pote dappen uma porção de IRM e um espécime de resina pronto, que,após a presa do material restaurador temporário e a remoção do exemplar colocado, gerou o molde pararealização das amostras em contato com o eugenol, sendo armazenado em água em temperatura ambiente,para os subgrupos 7 e 14 dias. Em sequência, foi inserido um único incremento de resina composta e polimerizadopor 40 segundos, gerando os espécimes que foram armazenados em local seco para serem submetidosao teste de microdureza Vickers sob uma carga de 300 gramas, com tempo de penetração de 10 segundos.Os dados obtidos foram analisados pelo teste ANOVA, a um nível de significância de p<0,05. Resultados:somente o grupo da resina Charisma® que teve contato imediato com eugenol não atingiu 80% de durezaprofunda em relação à superficial. Entretanto, para todos os grupos analisados, tanto a dureza superficialquanto a profunda aumentaram após o contato com o eugenol em relação ao grupo controle. Conclusão: oeugenol não influenciou negativamente a dureza das resinas compostas.(AU)

Objective: to evaluate, in vitro, the superficial and deep hardness of two different types of composite resin when in contact with zinc oxide eugenol cement (IRM). Method: Charisma® and Vittra® resins were selected and 80 specimens were made, 40 for each composite brand that were divided into eight groups (n = 10) according to contact (immediate, 7 days, 14 days) or no (control group) with eugenol. A portion of IRM and a ready-made resin specimen were placed in a dappen pot, which after setting the temporary restorative material and removing the placed specimen, generated the template for making the samples in contact with eugenol, being stored in water in room temperature for subgroups 7 and 14 days. In sequence, a single increment of composite was inserted and polymerized resin for 40 seconds, generating specimens that were stored in a dry place to be submitted to the Vickers microhardness test under a load of 300 grams, with a penetration time of 10 seconds. The data obtained were analyzed by the ANOVA test, at a significance level of p <0.05. Results: only the Charisma® resin group that had immediate contact with eugenol did not reach 80% deep hardness in relation to superficial hardness. However, for all groups analyzed, both superficial and deep hardness increased after contact with eugenol compared to the control group. Conclusion: eugenol did not negatively influence the hardness of composite resins.(AU)

Proteção da vitalidade dentino-pulpar em odontopediatria: uma revisão de literatura / Dentin-pulp protection in pediatric dentistry: a review

Dentin and pulp are considered interdependent substrates, known as the dentin-pulp complex. In front of injuries such as caries and trauma, this complex should be protected with restorative materials considered to be protective agents. An ideal material should have properties such as biocompatibility, be antimicrobial, be insoluble in the oral environment, be thermal and electrically insulating, have therapeutic potential, and adequate mechanical properties. As these characteristics are not found in all materials, the dentist must know the advantages and disadvantages of those that are available. This study aimed to perform a critical review of the indirect materials indicated for the protection of dentin-pulp vitality (PDPV) to ensure the success of indirect pulp treatment in primary teeth. A search was carried out in books, theses, dissertations, monographs, printed articles and databases, PubMed, SciELO, and MEDLINE. According to the literature, the success in protecting the dentin-pulp vitality is achieved through an excellent marginal seal, preventing bacterial infiltration in the dentin and controlling the progression of caries. Further clinical studies are needed to evaluate other outcomes after indirect pulp treatment. There isn't a material that has all the desired characteristics for PDPV, and recent studies show that the key to PDPV isn't found in the protective material, but in the restorations marginal sealing, enabling the inactivation of the progression of dental caries.

A dentina e a polpa são consideradas substratos interdependentes, conhecido como complexo dentino-pulpar. Frente a injúrias como cárie e traumatismo, deve-se realizar a proteção desse complexo, baseando-se na inserção de materiais restauradores considerados agentes protetores. Os materiais considerados ideais devem apresentar propriedades como: biocompatibilidade, ser antimicrobiano, ser insolúvel ao meio bucal, ser isolante térmico e elétrico, ter potencial terapêutico e propriedades mecânicas adequadas. Como essas características não são encontradas em todos os materiais, é importante que o cirurgião-dentista conheça as vantagens e as desvantagens daqueles que estão disponíveis comercialmente. O objetivo deste trabalho foi realizar uma revisão crítica da literatura sobre os materiais indicados para proteção indireta da vitalidade dentino-pulpar (PVDP), em dentes decíduos. Para isso, foram pesquisados livros, teses, dissertações, monografias, artigos impressos e das bases de dados, PubMed, SciELO e MEDLINE. De acordo com a literatura, observou-se que a garantia de êxito na proteção da vitalidade dentino-pulpar é alcançada por meio de um ótimo selamento marginal, impedindo a infiltração bacteriana na dentina e controlando a progressão da cárie. São necessários mais estudos clínicos que avaliem outros desfechos após o tratamento indireto da polpa. Não existe um material que possua todas as características desejadas para a PVDP, e estudos recentes demonstram que a chave não se encontra no material protetor, mas sim na vedação marginal das restaurações, propiciando a inativação da progressão da cárie dentária.

Orthodontics and Endodontics: clinical decision-making

ABSTRACT Endodontically treated teeth may be moved, as endodontic treatment is not a contraindication for orthodontic treatment. Apical periodontal repair begins when the periapical or pulp lesion has completely resolved. This may happen immediately after treatment if the filling material causes little or no irritation of periapical tissues, and particularly if the material is fully contained within the canal. When it leaks, a foreign body granuloma forms and persists for some months or indefinitely, depending on the composition of the filling material. Materials containing calcium hydroxide with no resin components undergo phagocytosis and disappear in some months, as macrophages gradually remove them. Materials containing resins, silicone, ionomers, zinc oxide-eugenol, bioceramics or gutta-percha remain in the site and induce the formation of foreign body granulomas. Although this does not preclude tooth movement, patients should be followed up every three months using periapical images to control the position of the material in relation to the tooth apex. "Pseudo" overfilling may be avoided if permanent filling is delayed until the time when orthodontic treatment is completed.

RESUMO Os dentes tratados endodonticamente podem ser movimentados, e não representam contraindicação para o tratamento ortodôntico. O reparo periodontal apical se inicia a partir do momento em que a causa da lesão pulpar e/ou periapical é eliminada. Isso ocorre de maneira imediata se o material obturador for pouco ou nada agressivo aos tecidos periapicais, especialmente se estiver limitado ao canal. Quando extravasado, haverá a formação de granuloma do tipo corpo estranho por alguns meses ou permanentemente, dependendo da composição do material obturador. Os materiais à base de hidróxido de cálcio sem componentes resinosos são fagocitáveis e, em alguns meses, desaparecem do local, pois os macrófagos irão gradativamente removê-los. Os materiais à base de resina, silicone, ionômero, óxido de zinco e eugenol, biocerâmicos e guta-percha permanecerão no local, induzindo granulomas periapicais do tipo corpo estranho, o que não inviabiliza a movimentação dentária, mas devem ser acompanhados a cada três meses com imagens periapicais, para um controle de sua relação espacial com o ápice dentário. A "pseudossobreobturação" pode ser evitada se a obturação definitiva for postergada para quando o tratamento ortodôntico terminar.

Clinical and radiographic evaluation of Curcumin Gel mixed Endoflas (CGE) powder as obturating material in primary molars / Avaliação clínica e radiográfica do pasta de curcumina Endoflas (CGE) como material obturador em molares decíduos

Background: Zinc oxide eugenol(ZOE) has long been the material of choice for obturating primary teeth,but it is resistant to resorption, might result in a deflected successor and has limited antibacterial efficacy. Curcuminpossessesanti-inflammatory and antimicrobialproperties which can be implied by its use as obturating material in primary teeth. Objective: To evaluate and compare the efficacy of Curcumin Gel mixed Endoflas powderand Zinc oxide eugenol as obturating materials in primary molars. Material and methods: A total of 30 primary molars indicated for pulpectomy were selected from 4-9-yearold children and divided into two equal groups based on the obturating material used. Group 1- Curcumin Gel mixed Endoflas powder(CGE) and Group 2- Zinc oxide eugenol(ZOE). The efficacy of these obturation materials was evaluatedboth clinically and radiographically. Follow-up was done after 1, 3 and 6months to evaluate clinical and radiographical success rates. The results were subjected to statistical analysis using SPSS software version 21 using chisquare test. Results: At the end of the 6th month follow-up,there was 93.3% clinical success in Group 1 compared with 86.6% success in Group 2. Whereas, radiographically success reported was 100% with Group 1 and 93.3% with Group 2. The difference in the radiographic success rate between the two Groups was statistically significant (P < 0.05). Conclusion: Based on the present study results, Curcumin Gel mixed Endoflas powder can be considered as an alternative obturation material for treating deciduous molars with extensive involvement of pulp and periradicular tissues.(AU)

Fundamentação: O óxido de zinco eugenol (OZE) há muito tempo é o material de escolha para a obturação de dentes decíduos, mas é resistente à reabsorção, podendo resultar em um dente permanente desviado e tem eficácia antibacteriana limitada. A curcumina possui propriedades anti-inflamatórias e antimicrobianas que podem indicar seu emprego como material obturador em dentes decíduos. Objetivo: Avaliar e comparar a eficácia da pasta de curcumina Endoflas e do óxido de zinco eugenol como materiais obturadores em molares decíduos. Material e métodos: Um total de 30 molares decíduos indicados para pulpectomia foram selecionados entre crianças de 4 a 9 anos e divididos em dois grupos iguais, com base no material obturador utilizado. Grupo 1 - pasta de curcumina Endoflas (CGE) e Grupo 2- óxido de zinco eugenol (ZOE). A eficácia desses materiais de obturação foi avaliada clinicamente e radiograficamente. O acompanhamento foi realizado após 1, 3 e 6 meses para avaliar as taxas de sucesso clínico e radiográfico. Os resultados foram submetidos à análise estatística no software SPSS versão 21, utilizando o teste quiquadrado. Resultados: No final do sexto mês de acompanhamento, houve 93,3% de sucesso clínico no Grupo 1 em comparação com 86,6% de sucesso no Grupo 2. Considerando que, o sucesso radiográfico relatado foi de 100% no Grupo 1 e 93,3% no Grupo 2. A diferença na taxa de sucesso radiográfico entre os dois grupos foi estatisticamente significante (P < 0,05). Conclusão: Com base nos resultados do presente estudo, a pasta de curcumina Endoflas pode ser considerada como um material de obturação alternativo para o tratamento de molares decíduos com amplo envolvimento de polpa e tecidos perirradiculares (AU)

Propriedades físico-químicas de cimentos endodônticos à base de óxido de zinco e eugenol / Physicochemical properties of zinc oxide and eugenol endodontic cements

Objetivo: Analisar as propriedades físico-químicas, escoamento, tempo de presa, solubilidade e alteração dimensional, dos cimentos endodônticos à base de óxido de zinco e eugenol: Endomethasone N, Endofill e Grosmann, de acordo com a especificação número 57 da American Dental Association. Métodos: Realizou-se os testes nas condições ambientais de 23° ± 2°C e 50 ± 5% de umidade relativa do ar, mantidas 48 h antes dos procedimentos, repetindo-se cinco vezes e obtendo-se uma média aritmética. Resultados: Os cimentos à base de óxido de zinco e eugenol analisados apresentaram tempo de endurecimento elevados, para o teste de escoamento, o Endofill e Grossman apresentaram-se acima do estabelecido. Em relação à solubilidade, o Endomethasone N esteve dentro do padrão e os demais cimentos excederam. Conclusão:Todos os cimentos analisados obtiveram valores diferentes do recomendado para alteração dimensional. Nenhum dos cimentos enquadrou-se completamente nas normatizações.

Aim: To analyze the physical-chemical properties, flow, setting time, solubility and dimensional change of endodontic cements, based on zinc oxide and eugenol: Endomethasone N, Endo fill, and Grosmann, according to specification number 57 of the American Dental Association. Methods: The tests were conducted under environmental conditions of 23° ± 2°C and 50 ± 5% relative air humidity, maintained for 48 h prior to the procedures, repeating five times and obtaining an arithmetic mean. Results: The cements based on zinc oxide and eugenol analyzed in this study showed high hardening times. For the flow test, Endo fill and Grossman were above the established parameters. Regarding solubility, Endomethasone N was within the standard, while the other cements exceeded this standard. Conclusion: All analyzed cements obtained values that proved to be different from those recommended for dimensional changes. None of the cements were completely compliant with the regulations.

Pulpal and periapical response of dogs' teeth after pulpotomy and use of enamel matrix derivative as a capping agent

Objective: To evaluate the pulpal and periapical response of dogs' teeth after pulpotomy and use of Enamel Matrix Derivative (EMD) as capping agent. Methods: Pulpotomy was performed in 40 teeth from 4 dogs and the remaining pulp tissue was recovered with the following materials: Groups I and IV: EMD (Emdogain®); Groups II and V: calcium hydroxide; Groups III and VI: zinc oxide and eugenol cement. After 7 days (Groups I, II, and III) and 70 days (Groups IV, V, and VI), the animals were euthanized and the teeth were removed and processed for histological analysis; were analyzed using Kruskal-Wallis test followed by Dunn test or Mann Whitney test ( =0.05). Results: 7-day period: in Group I, it was observed a mild to moderate inflammatory infiltrate and intense vascular proliferation while Group II presented a mild inflammatory infiltrate and an intact pulp tissue (p < 0.05). Group III presented a moderate to severe inflammatory infiltrate. 70- day period: Groups IV and VI showed no dentin bridge formation, the remaining pulp tissue presented necrotic areas with inflammatory cells in the periapical region and bone and cementum resorption (p > 0.05). In Group V, there was dentin bridge formation, absence of inflammation and absence of mineralized tissue resorption (p < 0.05). Conclusion: EMD as a capping material after pulpotomy did not show either satisfactory tissue response or capacity of inducing deposition of mineralized tissue in dental pulp.

Objetivo: Avaliar a resposta pulpar e periapical de dentes de cães após pulpotomia e uso de Derivados de Matriz de Esmalte (EMD) como agente de capeamento. Métodos: A pulpotomia foi realizada em 40 dentes de 4 cães e o tecido pulpar remanescente foi recuperado com os seguintes materiais: Grupos I e IV: EMD (Emdogain®); Grupos II e V: hidróxido de cálcio; Grupos III e VI: cimento de óxido de zinco e eugenol. Após 7 dias (Grupos I, II e III) e 70 dias (Grupos IV, V e VI), os animais foram eutanásiados e os dentes foram removidos e processados para análise histológica; foram analisados pelo teste de Kruskal-Wallis, seguido pelo teste de Dunn ou Mann Whitney ( = 0,05). Resultados: Período de 7 dias: no Grupo I, observou-se infiltrado inflamatório leve a moderado e intensa proliferação vascular, enquanto o Grupo II apresentou infiltrado inflamatório leve e tecido pulpar intacto (p <0,05). O grupo III apresentou infiltrado inflamatório moderado a grave. Período de 70 dias: os grupos IV e VI mostraram, na formação da ponte de dentina, que o tecido pulpar remanescente apresentava áreas necróticas com células inflamatórias na região periapical, reabsorção óssea e de cemento (p> 0,05). No Grupo V, houve formação de ponte de dentina, ausência de inflamação e ausência de reabsorção tecidual mineralizada (p <0,05). Conclusão: O EMD como material de cobertura após pulpotomia não mostrou resposta tecidual satisfatória ou capacidade de induzir deposição de tecido mineralizado na polpa dentária.

Avaliação da diferença de escoamento e espessura de película de quatro cimentos endodônticos / Evaluation of draining difference film thickness of four endodontic cements

O objetivo da endodontia é a obtenção de um sistema de canais radiculares livre de microrganismos. O presente estudo in vitro avaliou a diferença entre o escoamento e espessura de película de quatro cimentos endodônticos, Endofill, Sealer Plus, AHplus e Fill Canal. Os resultados foram avaliados através do teste de ANOVA de uma via e comparações múltiplas de Tukey ao nível de significância de 5%. Os resultados mostraram que os cimentos apresentaram diferença estatística significativa entre os grupos, nos testes de escoamento e espessura de película. Conclusão: o cimento Endofill apresentou um maior escoamento quando comparado ao cimento AHplus porém a diferença entre o restante dos cimentos foram estatisticamente irrelevantes quando levado em consideração todos os resultados obtidos e analises estatisticas realizadas. No teste de espessura de película os resultados mostraram que os cimentos endofill e sealer plus não apresentaram diferença entre si, no entanto apresentaram diferença estatística significativa em relação aos cimentos AH plus e Fill Canal, que apresentaram uma espessura de película maior(AU)

The purpose of endodontics is to obtain a system of root canals free of microorganisms. The present in vitro study evaluated the difference between flow and film thickness of four endodontic cements, Endofill, Sealer Plus, AHplus and Fill Canal. The results were evaluated through the one-way ANOVA test and Tukey's multiple comparisons at a significance level of 5%. The results showed that the cements presented significant statistical difference between the groups, in the tests of flow and film thickness. Conclusion: Endofill cement presented higher flow when compared to cement AHplus, but the difference between the rest of the cement was statistically irrelevant when all results obtained and statistical analysis were taken into account. In the film thickness test, the results showed that the endofill and sealer plus cements did not show any difference between them, however they presented a significant statistical difference in relation to the AH plus and Fill Canal cements, which presented a higher film thickness(AU)

Avaliação in vitro da influência de cimentos endodônticos na resistência de união sobre estrutura dentinária da câmara pulpar de dentes restaurados imediatamente e mediatamente após obturação / In vitro evaluation of the influence of endodontic cements on bond strength on the dentin structure of the pulp chamber of teeth restored immediately and immediately after filling

Este estudo teve por finalidade avaliar a influência dos cimentos endodônticos com um protocolo de irrigação na resistência de união sobre a estrutura dentinária das paredes da câmara pulpar de dentes bovinos restaurados imediatamente e após 7 dias do tratamento endodôntico. Foram avaliados os cimentos endodônticos: Cimento à base de resina epoxy (AH Plus ­ Dentsply, DeTrey, Konstanz- Alemanha) e Cimento de óxido de zinco e eugenol (Endofill ­ Dentsply Ind.com. LTDA ­ Brasil). Para a realização das restaurações foi utilizado o sistema adesivo Single Bond 2® (3M/ESPE) e a resina composta Z 350TM (3M/ESPE). 60 faces vestibulares da câmara pulpar de dentes bovinos foram distribuídos aleatoriamente em 4 grupos experimentais (G1-AHPlus Imediato; G2-AHPlus Mediato; G3-OZE Imediato; G4-OZE Mediato) e 2 controles (G5- NaOCl + EDTA Imediato e G6-NaOCl + EDTA Mediato). O protocolo de irrigação endodôntica deu-se através da imersão dos espécimes em solução de hipoclorito de sódio a 2.5% por 30 minutos e em EDTA 17% por 3 minutos. Os cimentos testados estiveram em contato com a parede dentinária pelo tempo de presa inicial, seguido de limpeza com algodão embebido em álcool 70% por 1 minuto. Os grupos experimentais de restauração mediata foram mantidos em estufa a 37ºC por 7 dias. Após o corte e a obtenção dos palitos de +/-1,0 mm² foi aplicado o teste de microtração na Máquina de Ensaios Universal e, em seguida, observados em microscópio óptico para classificação da fratura. Os valores da resistência de união foram submetidos ao teste não-paramétrico Wilcoxon-Mann-Whitney comparando dois a dois grupos a um nível de significância de 5%. Os resultados mostraram que o grupo G5 obteve menor valor de resistência de união, com diferença estatisticamente significativa (p<0,05) para os demais. O padrão de fratura mais observado nos grupos foi a coesiva em camada híbrida. Conclui-se que a associação NaOCl + EDTA diminui a resistência de união nas restaurações imediatas e que os cimentos endodônticos não alteraram a resistência de união nos períodos testados (AU).

This study aimed to evaluate the influence of endodontic sealer with an irrigation protocol on the bond strength on the dentinal structure of the pulp chamber walls of bovine teeth restored immediately and after 7 days of endodontic treatment. Endodontic sealer were evaluated: epoxy resin-based sealer (AH Plus - Dentsply, DeTrey, Konstanz- Germany) and zinc oxide and eugenol sealer (Endofill - Dentsply Ind.com. LTDA - Brazil). To perform the restorations, the Single Bond 2® adhesive system (3M / ESPE) and the composite resin Z 350TM (3M / ESPE) were used. 60 vestibular faces of the pulp chamber of bovine teeth were randomly assigned to 4 experimental groups (G1-AHPlus Immediate; G2-AHPlus Mediato; G3-OZE Immediate; G4-OZE Mediato) and 2 controls (G5- NaOCl + EDTA Immediate and G6- NaOCl + EDTA Mediato). The endodontic irrigation protocol was carried out by immersing the specimens in 2.5% sodium hypochlorite solution for 30 minutes and in 17% EDTA for 3 minutes. The tested sealers were in contact with the dentin wall for the initial setting time, followed by cleaning with cotton soaked in 70% alcohol for 1 minute. The experimental groups of mediated restoration were kept in an oven at 37ºC for 7 days. After cutting and obtaining the +/- 1.0 mm² toothpicks, the microtensile test was applied to the Universal Testing Machine and then observed under an optical microscope to classify the fracture. The bond strength values were subjected to the non-parametric Wilcoxon-Mann-Whitney test comparing two to two groups at a significance level of 5%. The results showed that the G5 group had a lower bond strength value, with a statistically significant difference (p <0.05) for the others. The most observed fracture pattern in the groups was cohesive in a hybrid layer. It is concluded that the association NaOCl + EDTA decreases the bond strength in immediate restorations and that endodontic sealer did not change the bond strength in the tested periods (AU).

Evaluation of physical-mechanical properties, antibacterial effect, and cytotoxicity of temporary restorative materials

Abstract The objective of this study was to compare selective physical-mechanical properties, antibacterial effects and cytotoxicity of seven temporary restorative materials (TRM): five resin-based materials [Bioplic (B), Fill Magic Tempo (FM), Fermit inlay (F), Luxatemp LC (L) and Revotek LC (R)], and zinc oxide-eugenol cement (IRM) and glass ionomer cement (GIC) as the controls. Material and methods The physical-mechanical properties were evaluated by determining microleakage (ML), ultimate tensile strength (UTS) and Shore D hardness (SDH). In addition, the polymerization rate (Pr-1), depth of cure (DC), water sorption and solubility (WS/SL) were evaluated. The antimicrobial effects of the materials were assessed by biofilm accumulation of Streptococcus mutans (BT) and the direct contact test (DCT) by exposure to Enterococcus faecalis for 1 and 24 h, and cytotoxicity by MTT assay. The data were analyzed by ANOVA or Kruskall-Wallis tests, and a complementary post-hoc method (p<0.05). Results Group B, followed by FM and GIC had significantly lower percentages of microleakage in comparison with the other groups; Groups FM and L showed the highest WS, while Groups R and FM showed the significantly lowest SL values (p<0.05). Group R showed the statistically highest UTS mean and the lowest DC mean among all groups. Group F showed the lowest S. mutans biofilm accumulation (p=0.023). Only the Group L showed continued effect against E. faecalis after 1 h and 24 h in DCT. The L showed statistically lower viability cell when compared to the other groups. Conclusions These findings suggest the antibacterial effect of the temporary materials Fill Magic and Bioplic against S. mutans, while Luxatemp showed in vitro inhibition of S. mutans biofilm accumulation and E. faecalis growth. Regarding the cell viability test, Luxatemp was the most cytotoxic and Fill Magic was shown to be the least cytotoxic.

Solubility, porosity and fluid uptake of calcium silicate-based cements

Abstract Objective: To evaluate the absorption/fluid uptake, solubility and porosity of White mineral trioxide aggregate (MTA) Angelus, Biodentine (BIO), and zinc oxide-eugenol (ZOE). Material and Methods: Solubility was evaluated after immersion in distilled water for 7 and 30 days. Porosity was evaluated using digital inverted microscope, scanning electron microscope (SEM) and micro-computed tomography (micro-CT). For the fluid uptake test, specimens were immersed in Hank's balanced salt solution (HBSS) for 1, 7, 14 and 28 days. Fluid absorption, solubility and porosity of the materials were measured after each period. Statistical evaluation was performed using one-way analysis of variance (ANOVA) and Tukey tests, with a significance level at 5%. Results: After 7 and 30 days, BIO showed the highest solubility (p<0.05). All methods demonstrated that MTA had total porosity higher than BIO and ZOE (p<0.05). Micro-CT analysis showed that MTA had the highest porosity at the initial period, after its setting time (p<0.05). After 7 and 30 days, ZOE had porosity lower than MTA and BIO (p<0.05). Absorption was similar among the materials (p>0.05), and higher fluid uptake and solubility were observed for MTA in the fluid uptake test (p<0.05). Conclusions: BIO had the highest solubility in the conventional test and MTA had higher porosity and fluid uptake. ZOE had lower values of solubility, porosity and fluid uptake. Solubility, porosity and fluid uptake are related, and the tests used provided complementary data.

Evaluation of physicochemical properties of root-end filling materials using conventional and Micro-CT tests

Abstract Objective To evaluate solubility, dimensional stability, filling ability and volumetric change of root-end filling materials using conventional tests and new Micro-CT-based methods. Material and Methods Solubility (loss of mass) after 7 and 30 days, and dimensional stability (in mm) were evaluated in accordance with Carvalho-Junior, et al. 7 (2007). The filling ability and volumetric change (in mm3) were evaluated by Micro-CT (Bruker-MicroCT, Kontich, Belgium) using resin models with cavities 3 mm deep and 1 mm in diameter. The cavities were filled with materials to evaluate filling ability, and then scanned by Micro-CT. After 7 and 30 days immersed in distilled water, the filled cavities were scanned again to evaluate the volumetric change. MTA Angelus (MTA), Biodentine (BIO) and zinc oxide-eugenol cement (ZOE) were evaluated. Data were submitted to analysis of variance (ANOVA) and Tukey's test with 5% significance level. Results The results suggested correlated or complementary data between the proposed tests. At 7 days, BIO showed higher solubility and at 30 days, showed higher volumetric change in comparison with MTA (p<0.05). With regard to volumetric change, the tested materials were similar (p>0.05) at 7 days. At 30 days, they presented similar solubility. BIO and MTA showed higher dimensional stability than ZOE (p<0.05). ZOE and BIO showed higher filling ability (p<0.05). Conclusions ZOE presented a higher dimensional change, and BIO had greater solubility after 7 days. BIO presented filling ability and dimensional stability, but greater volumetric change than MTA after 30 days. Micro-CT can provide important data on the physicochemical properties of materials complementing conventional tests.

A Case of Recurrent Urticaria Due to Formaldehyde Release from Root-Canal Disinfectant

Although formaldehyde is well known to cause type 4 hypersensitivity, immunoglobulin E (IgE)-mediated hypersensitivity to formaldehyde is rare. Here, we report a case of recurrent generalized urticaria after endodontic treatment using a para-formaldehyde (PFA)-containing root canal sealant and present a review of previous studies describing cases of immediate hypersensitivity reactions to formaldehyde. A 50-year-old man visited our allergy clinic for recurrent generalized urticaria several hours after endodontic treatment. Prick tests to latex, lidocaine, and formaldehyde showed negative reactions. However, swelling and redness at the prick site continued for several days. The level of formaldehyde-specific IgE was high (class 4). Thus, the patient was deemed to have experienced an IgE-mediated hypersensitivity reaction caused by the PFA used in the root canal disinfectant. Accordingly, we suggest that physicians should pay attention to type I hypersensitivity reactions to root canal disinfectants, even if the symptoms occur several hours after exposure.

Efectividad clínica y radiográfica de la pasta antibiótica CTZ en pulpotomías de molares primarios: ensayo clínico aleatorio controlado / Clinical and radiographic effectiveness of antibiotic paste CTZ in primary molars pulpotomy: ramdomized controlled clinical trial

El objetivo de este trabajo fue evaluar clínica y radiográficamente la efectividad de la pasta antibiótica CTZ en pulpotomías de molares primarios. Se realizó un ensayo clínico aleatorio controlado, en 40 molares primarios de 40 preescolares con edades entre 3 y 6 años. Los pacientes fueron seleccionados y asignados aleatoriamente a dos grupos: Formocresol (n=20), CTZ (Cloranfenicol-Tetraciclina-Oxido de Zinc Eugenol, n=20). Los dientes fueron restaurados con ionómero de vidrio y coronas metálicas de acero preformadas. La evaluación clínica y radiográfica fue realizada a los 3 y 6 meses. Se utilizó el programa SPSS v.17 para el análisis de los datos, y la aplicación del Test Exacto de Fisher al 5 %. El comportamiento clínico a los 3 meses mostró 75 % de éxito para los molares tratados con formocresol y 70 % para el CTZ. Radiográficamente se obtuvo 90 % de éxito para el grupo con formocresol y 100 % para la pasta CTZ. A los 6 meses el éxito clínico del formocresol fue de 85 % y del CTZ 80 %. El éxito radiográfico mostrado fue 65 % para los atendidos con formocresol y 80 % para el CTZ (p > 0,05). No se observaron diferencias significativas entre los grupos de tratamiento. La pasta CTZ es una alternativa en el tratamiento de pulpotomías de molares temporales. Ofrece un efecto antimicrobiano, estabilización del proceso de reabsorción radicular, sin ocasionar daños a la formación del diente permanente.

The objective of this study to evaluate the clinical and radiographic effectiveness of antibiotic paste CTZ in pulpotomy of primary molars. A randomized controlled clinical trial was performed, in 40 molars of 40 patients aged 3 to 6 years. Were selected and randomly assigned to two groups: Formocresol (n=20), CTZ (Chloramphenicol-Tetracycline-Zinc Oxide Eugenol, n=20). The teeth were restored with glass ionomer and performed steel metal crowns. Clinical and radiographic evaluation procedure was performed at 3 and 6 months. SPSS v.17 program for data analysis, and application of the Fisher exact test was used 5 %. The clinical behavior at 3 months showed 75 % success rate for molars treated with formocresol and 70 % for the CTZ. Radiographically 90 % success rate for the group with formocresol and 100 % for the CTZ paste was obtained. At 6 months formocresol clinical success was 85 % and 80 % CTZ. Radiographic success was shown 65 % for those treated with formocresol and 80 % for the CTZ (p>0.05). No significant differences in the results shown were observed. CTZ paste is an alternative in the treatment of pulpotomy of molars. It provides an antimicrobial effect, stabilizing the process of root resorption, without causing damage to the permanent tooth formation.

Microfiltración apical in vitro causada por las técnicas de obturación con cono único, System B y condensación lateral clásica / In vitro apical microleakage causade by single-cone, System B and cold lateral condensation obturation techniques

La obtención de un sellado hermético en la obturación del conducto radicular es una etapa coadyuvante del éxito endodóntico. Objetivo: Comparar la microfi ltración apical in vitro, calidad de relleno y presencia de espacios vacíos en conductos radiculares obturados con los métodos de obturación cono único, condensación lateral clásica y System B. Material y métodos: Noventa raíces mesiales de molares inferiores fueron instrumentados con ProTaper a un calibre F3 y asignados aleatoriamente para su obturación a tres grupos (n = 30 raíces), grupo 1: condensación lateral clásica con gutapercha #30.02, grupo 2: cono único con gutapercha F3 y grupo 3: System B con gutapercha #30.02; en todas las técnicas se usó una mezcla de óxido de zinc eugenol como sellador.Obturados los conductos las muestras se sumergieron en azul de metileno al 0.5 por ciento, se centrifugaron a 3,200 rpm durante cinco minutos, se diafanizarony se llevaron al microscopio estereoscópico a 12.5x para la mediciónde microfi ltración apical, calidad de relleno y presencia de espacios vacíospor un observador calibrado. Resultados: No se encontraron diferencias significativas en la microfi ltración apical entre el grupo de condensación lateral clásica y System B (p > 0.05) siendo el cono único la técnica que presenta mayor fi ltración. La técnica que ofrece la menor cantidad de espacios vacíos y mejor calidad de relleno es System B. Conclusiones:El método System B y condensación lateral clásica dejan una baja microfiltración apical y adecuada calidad de relleno comparada con la que sepresenta con cono único utilizando como sellador óxido de zinc eugenol...

Dissolution of a mineral trioxide aggregate sealer in endodontic solvents compared to conventional sealers

Abstract The aim of this study is to evaluate the solubility of a Mineral Trioxide Aggregate sealer (MTA-Fillapex) compared with five other sealers, calcium hydroxide (Sealapex), resin (Realseal), zinc oxide-eugenol (Tubli-Seal), and two epoxy resins (AH-26 and AH-Plus), in chloroform and eucalyptoil in static and ultrasonic environments. Samples of each sealer were prepared (n = 180) and then divided into 12 groups that were immersed in solvents for 5 and 10 min in static and ultrasonic environments. The mean weight loss was determined, and the values were compared using Student's t-test, One-way ANOVA, and Tukey's HSD post-hoc test (p < 0.05). In chloroform, MTA-Fillapex, AH-26, and Sealapex displayed moderate solubility with no significant difference in dissolution (p = 0.125); however, their dissolution was significantly lower than that of AH-Plus (p < 0.001), which was almost fully dissolved after 10 minutes. Realseal was significantly less soluble than all sealers (p < 0.001). In eucalyptoil, MTA-Fillapex showed low solubility, as all of the sealers did, but Tubli-Seal was significantly more soluble than other sealers (p < 0.001). Using ultrasonic activation resulted in a significantly higher dissolution rate in chloroform for all sealers except MTA-Fillapex after 10 min (p = 0.226). In eucalyptoil, ultrasonic activation significantly increased the dissolution rate of all sealers except MTA-Fillapex after 5 and 10 min, Sealapex at 10 min, and AH-Plus at 5 min (p > 0.05). In conclusion, MTA-Fillapex was not sufficiently dissolved in either solvent. Ultrasonic activation had limited effectiveness on MTA-Fillapex dissolution, whereas it significantly increased the efficiency of solvents in dissolving a number of endodontic sealers.

Recomendações e práticas dos comportamentos saudáveis entre indivíduos com diagnóstico de hipertensão arterial e diabetes no Brasil: Pesquisa Nacional de Saúde (PNS), 2013 / Recommendations and practice of healthy behaviors among patients with diagnosis and diabetes in Brazil: National Health Survey (PNS), 2013

Resumo: Objetivo: Analisar as recomendações relacionadas aos comportamentos saudáveis e a adoção das práticas recomendadas entre indivíduos hipertensos e diabéticos. Métodos: Foram analisadas recomendações relacionadas aos comportamentos saudáveis segundo local do último atendimento (atenção básica; outros estabelecimentos públicos; estabelecimentos do setor privado). Os efeitos de ter um diagnóstico de hipertensão ou diabetes sobre a adoção das práticas recomendadas foram analisados por modelos de regressão logística multivariada, usando sexo, idade, e grau de escolaridade como variáveis de controle, e os seguintes desfechos: uso atual de produtos de tabaco; prática regular de atividade física no lazer; consumo recomendado de hortaliças e frutas; percepção de baixo consumo de sal; consumo frequente de doces; consumo excessivo de álcool. Resultados: Aproximadamente, 88% dos hipertensos receberam recomendações de ter uma alimentação saudável, 91% de ingerir menos sal, 83% de praticar atividade física regular, e 76% de não fumar. Entre os diabéticos, todas as recomendações relacionadas à alimentação foram muito frequentes, 95% para o hábito de ter uma alimentação com frutas e hortaliças. O efeito de ter um diagnóstico de hipertensão foi significativo para o não uso de produtos de tabaco e percepção de baixo consumo de sal. O diagnóstico de diabetes influenciou principalmente o hábito de não consumir doces frequentemente. Conclusão: Evidenciou-se que os hipertensos e diabéticos dão prioridade a não usar hábitos nocivos à saúde do que adotar práticas que lhe trarão benefícios. É preciso promover não só os efeitos adversos dos hábitos nocivos, mas também os benefícios dos comportamentos saudáveis para o envelhecimento com qualidade.

Abstract: Objective: To analyze healthy life style recommendations given in health care and the adoption of healthy behaviors among hypertension and diabetes patients. Methods: We analyzed the recommendations according to the place of the last health care visit (primary health care, other public facilities, and private health care facilities). The effects of having a diagnosis of hypertension or diabetes on the adoption of healthy practices were analyzed by multivariate logistic regression models, using sex, age, and educational level as control variables, and the following outcomes: current use of tobacco products; regular physical activity during leisure time; recommended intake of fruits and vegetables; perception of low salt intake; frequent consumption of sweets; and excessive alcohol consumption. Results: Approximately 88% of hypertension patients received recommendations to have a healthy diet, 91% to eat less salt, 83% to practice regular physical activity, and 76% to not to smoke. Among diabetic patients, all recommendations related to nutrition were very frequent, reaching 95% for the habit of having fruits and vegetables regularly. The effect of having a diagnosis of hypertension was significant for non-use of tobacco products and perception of low salt intake. The diagnosis of diabetes mainly influenced the habit of not consuming sweets often. Conclusion: Results evidenced that people with diagnosis of hypertension and diabetes give priority to not use (stop) harmful health behaviors than to adopt practices that will bring benefits to their health. It is necessary to promote not only the adverse effects of harmful habits, but also the benefits of healthy behaviors to aging well.